Threads

in one of his movie's he's in a Roll Royce about 1964 rolls, with spoke wheels, and he get s knocked out, then they push the rolls into a pond and wait for bond to come to the top of the water for air, but bond unscrews a valve stem and takes air form a tire under water, ok on that model rolls it had spoked wheels, Roll Royce put long valve stems on the wheel so people could put air in the tires , with short valve stems its very hard to get the air chuck to the valve to put air in the tires, if not at all, any ways bond sucks air from a long valve stem , the trick to this is easy, just remove the valve cap then put the valve stem in your mouth and use one of your top eye teeth to push down on the valve core, thus a air supply, but there;s a WARRING, compressed air has water in it, you may have to deflate the tire , and use air only from a dive tank, this air is safe to use, if u get water in your lungs, you can not stand on your head , and the water will not come out, use only dive tank air. keep up the great work, and guys i'm starting to call you guys the mythbrothers, u guys act like brothers on the show...................ed

 out of  found this valuable. Do you find this valuable?    

• Post reply

First, to address previous: Bond's first gun was a Beretta 950, .25acp. The Walther P99 was the "new" Bond gun.

As far as magnetic deflection of bullets... did you guys use a steel jacketed .45acp? I could see eddy currents stopping the spin on a copper jacketed round and causing it to tumble, but come on... regular bullets are nonferromagnetic, the only effect would be from foucault currents and joule heating. My name dot blogspot dot com, I wrote a little about it.

If you were using a steel jacketed projectile, I'm kind of dissappointed... that's almost like cheating.

3  out of 3 found this valuable. Do you find this valuable? Do you?    

• Post reply